Consulting & Program Management
The big picture: engineering, DFM, prototype, LRIP, manufacturing, and production. One partner who stays on the part until it is real.
Capabilities
The rim is the path.
Consulting and program management are the rim that holds the work: engineer it, design it to run, prove it, start the run, then scale it. The drawing is one cut. The path is the work.
Mechanical design
SolidWorks from first sketch through production drawings. Assemblies that fit the first time they are built.
Design for manufacture
Tolerances, tooling, materials, and process chosen together so the drawing is something a partner shop can actually run.
Prototype & prove
Print and machine through craftsmen Durinrim works with. Inspect here. Go/no-go gauges, check fixtures, and the honest loop between the model and the part.
LRIP
Low-rate initial production: the first honest run. Tooling, yield, and the drawings that survive contact with a real floor.
Manufacturing & production
Release packs, DFM notes, and a partner still on the call when the run scales. Ballistics, oilfield, retail, prototype.
The path
Engineering through production.
01
Engineering
What has to exist, what it has to survive, and whether the physics even allows it.
02
DFM
The drawing a shop can run. Tolerances, materials, tooling, chosen together.
03
Prototype
Cut it. Hold it. The first part is where the model stops lying.
04
LRIP
A small run that has to be real. Yield, fixtures, the first production habits.
05
Manufacturing
Process, pack, the floor. Durinrim stays on the drawing while partners cut.
06
Production
It ships. The partner is still on the call.